FS25 Reference

Vehicle XML Reference

Search by section ID (example: design15Configurations) and jump straight to it. This is the GIANTS vehicle.xml validation reference, rebuilt into a modder-friendly reader with XML-style folding.

FS25 v1.16.0.0 Source: vehicle.html Updated: 2026-02-15 20:47
Clear
Tip: you can type <design15Configurations too. It will still find it. Keyboard: / focuses search, Esc clears suggestions.
1 section loaded Direct

attachable

Link
<attachable connectionHoseConfigId="integer"Description: Connection hose configuration index to use
Type: Integer
Required: no
 powerTakeOffConfigId="integer"Description: Power take off configuration index to use
Type: Integer
Required: no
 allowFoldingWhileLowered="true"Description: Allow folding while lowered
Type: Boolean
Default: true
Required: no
 blockFoliageDestruction="false"Description: If active the vehicle will block the complete foliage destruction of the vehicle chain
Type: Boolean
Default: false
Required: no
 allowFoldingWhileAttached="true"Description: Allow folding while attached
Type: Boolean
Default: true
Required: no
>
<inputAttacherJoints>
<inputAttacherJoint forceSelectionOnAttach="true"Description: Is selected on attach
Type: Boolean
Default: true
Required: no
 smoothAttachTime="0.5"Description: Time until the attachment is fully attached (seconds)
Type: Time in seconds
Default: 0.5
Required: no
 bottomArmRightNode="node"Description: Right bottom arm node (Node can be used as movingTool target from the tractor)
Type: Index to i3d node or i3d mapping identifier
Required: no
 topReferenceNode="node"Description: Top Reference Node
Type: Index to i3d node or i3d mapping identifier
Required: no
 hardAttach="false"Description: Implement is hard attached
Type: Boolean
Default: false
Required: no
 transLimitForceLimit="-1 -1 -1"Description: Translation limit force limit
Type: Multiple values (x, y, z)
Default: -1 -1 -1
Required: no
 attachAngleLimitAxis="1"Description: Direction axis which is used to calculate angle to enable attach
Type: Integer
Default: 1
Required: no
 lowerTransLimitScale="0 0 0"Description: Lower trans limit scale
Type: Multiple values (x, y, z)
Default: 0 0 0
Required: no
 isControllable="false"Description: Is controllable
Type: Boolean
Default: false
Required: no
 rotLimitForceLimit="-1 -1 -1"Description: Rotation limit force limit
Type: Multiple values (x, y, z)
Default: -1 -1 -1
Required: no
 foldMaxLimit="1"Description: Fold max. time
Type: Float
Default: 1
Required: no
 forcedAttachingDirection="0"Description: Tool can be only attached in this direction
Type: Integer
Default: 0
Required: no
 bottomArmLeftNode="node"Description: Left bottom arm node (Node can be used as movingTool target from the tractor)
Type: Index to i3d node or i3d mapping identifier
Required: no
 allowsLowering="boolean"Description: Allows lowering
Type: Boolean
Required: no
 allowAI="true"Description: Toggling of AI is allowed while attached to this attacher joint
Type: Boolean
Default: true
Required: no
 nodeVisual="node"Description: Visual joint node
Type: Index to i3d node or i3d mapping identifier
Required: no
 forceAllowDetachWhileLifted="false"Description: Attacher vehicle can be always detached no matter if we are lifted or not
Type: Boolean
Default: false
Required: no
 canBeTurnedOn="true"Description: Attacher joint can turn on implement
Type: Boolean
Default: true
Required: no
 allowsDetaching="true"Description: Allows detaching
Type: Boolean
Default: true
Required: no
 allowFolding="true"Description: Folding is allowed while attached to this attacher joint
Type: Boolean
Default: true
Required: no
 needsLowering="boolean"Description: Needs lowering
Type: Boolean
Required: no
 upperRotLimitScale="0 0 0"Description: Upper rot limit scale
Type: Multiple values (x, y, z)
Default: 0 0 0
Required: no
 fixedRotation="false"Description: Fixed rotation (Rot limit is freezed)
Type: Boolean
Default: false
Required: no
 isDefaultLowered="false"Description: Is default lowered
Type: Boolean
Default: false
Required: no
 allowDetachWhileParentLifted="true"Description: If set to false the parent vehicle needs to be lowered to be able to detach this implement
Type: Boolean
Default: true
Required: no
 useFruitCutHeight="true"Description: The lower distance to ground is used from the cutHeight defined in the current fruit type
Type: Boolean
Default: true
Required: no
 attacherHeight="float"Description: Height of attacher
Type: Float
Default: 0.9 for trailer, 0.55 for trailer low
Required: no
 allowTurnOn="true"Description: Turn on is allowed while attached to this attacher joint
Type: Boolean
Default: true
Required: no
 upperTransLimitScale="0 0 0"Description: Upper trans limit scale
Type: Multiple values (x, y, z)
Default: 0 0 0
Required: no
 needsTrailerJoint="false"Description: Needs trailer joint (only if no joint type is given)
Type: Boolean
Default: false
Required: no
 allowsJointTransLimitMovement="true"Description: Translation limit is changed during lifting/lowering
Type: Boolean
Default: true
Required: no
 transLimitDamping="1 1 1"Description: Translation limit damping
Type: Multiple values (x, y, z)
Default: 1 1 1
Required: no
 steeringBarLeftNode="node"Description: Left steering bar node (Node of movingPart that should point towards the steeringBar left node of the tractor)
Type: Index to i3d node or i3d mapping identifier
Required: no
 rootNode="node"Description: Root node
Type: Index to i3d node or i3d mapping identifier
Default: Parent component of attacher joint node
Required: no
 transLimitThreshold="0"Description: Defines when the transition from upper to lower trans limit starts (0: directly, 0.9: after 90% of lowering)
Type: Float
Default: 0
Required: no
 needsLowJoint="false"Description: Needs low trailer joint (only if no joint type is given)
Type: Boolean
Default: false
Required: no
 lowerRotLimitScale="0 0 0"Description: Lower rot limit scale
Type: Multiple values (x, y, z)
Default: 0 0 0
Required: no
 upperRotationOffset="angle"Description: Rotation offset if lifted
Type: Angle
Default: 8 degrees for implements
Required: no
 allowsJointRotLimitMovement="true"Description: Rotation limit is changed during lifting/lowering
Type: Boolean
Default: true
Required: no
 transLimitSpring="0 0 0"Description: Translation limit spring
Type: Multiple values (x, y, z)
Default: 0 0 0
Required: no
 rotLimitDamping="1 1 1"Description: Rotation limit damping
Type: Multiple values (x, y, z)
Default: 1 1 1
Required: no
 foldMinLimit="0"Description: Fold min. time
Type: Float
Default: 0
Required: no
 rotLimitSpring="0 0 0"Description: Rotation limit spring
Type: Multiple values (x, y, z)
Default: 0 0 0
Required: no
 useFoldingLoweredState="false"Description: Use folding lowered state
Type: Boolean
Default: false
Required: no
 needsToolbar="false"Description: Needs toolbar
Type: Boolean
Default: false
Required: no
 steeringBarRightNode="node"Description: Right steering bar node (Node of movingPart that should point towards the steeringBar right node of the tractor)
Type: Index to i3d node or i3d mapping identifier
Required: no
 node="node"Description: Joint Node
Type: Index to i3d node or i3d mapping identifier
Required: no
 drawbarNode="node"Description: Drawbar node (Node of movingPart that should point towards the attacherJoint node of the tractor)
Type: Index to i3d node or i3d mapping identifier
Required: no
 jointType="string"Description: Joint type
Type: String
Required: no
 lowerRotationOffset="angle"Description: Rotation offset if lowered
Type: Angle
Required: no
 rotLimitThreshold="0"Description: Defines when the transition from upper to lower rot limit starts (0: directly, 0.9: after 90% of lowering)
Type: Float
Default: 0
Required: no
 useTopLights="true"Description: Defines if the tool attached to this attacher activates to automatic switch to the top lights
Type: Boolean
Default: true
Required: no
>
<objectChange deleteInactive="boolean"Description: delete if object change is active
Type: Boolean
Required: no
 movingToolRotMaxInactive="angle"Description: Moving tool max. rotation if object change inactive
Type: Angle
Required: no
 visibilityInactive="boolean"Description: visibility if object change is in active
Type: Boolean
Required: no
 parentNodeInactive="node"Description: parent node if object change is in active
Type: Index to i3d node or i3d mapping identifier
Required: no
 shaderParameterActive="x y z w"Description: shaderParameter if object change is active
Type: Multiple values (x, y, z, w)
Required: no
 compoundChildInactive="boolean"Description: compound child state if object change is in active
Type: Boolean
Required: no
 rotationActive="x y z"Description: rotation if object change is active
Type: Rotation values (x, y, z)
Required: no
 interpolationTime="1"Description: Time for interpolation
Type: Time in seconds
Default: 1
Required: no
 massInactive="float"Description: mass if object change is in active
Type: Float
Required: no
 movingToolTransMinActive="float"Description: Moving tool min. translation if object change active
Type: Float
Required: no
 shaderParameter="string"Description: Shader parameter name
Type: String
Required: no
 centerOfMassInactive="x y z"Description: center of mass if object change is in active
Type: Multiple values (x, y, z)
Required: no
 sharedShaderParameter="false"Description: Shader parameter is applied on all objects with the same material
Type: Boolean
Default: false
Required: no
 movingToolTransMaxInactive="float"Description: Moving tool max. translation if object change inactive
Type: Float
Required: no
 movingToolStartRotInactive="angle"Description: Moving tool start rotation if object change inactive
Type: Angle
Required: no
 movingPartUpdateActive="boolean"Description: moving part active state if object change active
Type: Boolean
Required: no
 centerOfMassActive="x y z"Description: center of mass if object change is active
Type: Multiple values (x, y, z)
Required: no
 massActive="float"Description: mass if object change is active
Type: Float
Required: no
 movingPartUpdateInactive="boolean"Description: moving part active state if object change inactive
Type: Boolean
Required: no
 scaleInactive="x y z"Description: scale if object change is in active
Type: Scale values (x, y, z)
Required: no
 visibilityActive="boolean"Description: visibility if object change is active
Type: Boolean
Required: no
 parentNodeActive="node"Description: parent node if object change is active
Type: Index to i3d node or i3d mapping identifier
Required: no
 shaderParameterInactive="x y z w"Description: shaderParameter if object change is in active
Type: Multiple values (x, y, z, w)
Required: no
 rigidBodyTypeActive="string"Description: rigid body type if object change is active
Type: String
Required: no
 movingToolRotMinActive="angle"Description: Moving tool min. rotation if object change active
Type: Angle
Required: no
 node="node"Description: Object change node
Type: Index to i3d node or i3d mapping identifier
Required: no
 translationActive="x y z"Description: translation if object change is active
Type: Translation values (x, y, z)
Required: no
 interpolation="false"Description: Value will be interpolated
Type: Boolean
Default: false
Required: no
 movingToolStartRotActive="angle"Description: Moving tool start rotation if object change inactive
Type: Angle
Required: no
 shaderParameterSetRecursive="false"Description: Shader parameter is applied to all child nodes recursively
Type: Boolean
Default: false
Required: no
 movingToolTransMaxActive="float"Description: Moving tool max. translation if object change active
Type: Float
Required: no
 movingToolStartTransInactive="float"Description: Moving tool start translation if object change inactive
Type: Float
Required: no
 rigidBodyTypeInactive="string"Description: rigid body type if object change is in active
Type: String
Required: no
 movingToolTransMinInactive="float"Description: Moving tool min. translation if object change inactive
Type: Float
Required: no
 movingToolRotMinInactive="angle"Description: Moving tool min. rotation if object change inactive
Type: Angle
Required: no
 deleteActive="boolean"Description: delete if object change is active
Type: Boolean
Required: no
 movingToolRotMaxActive="angle"Description: Moving tool max. rotation if object change active
Type: Angle
Required: no
 movingToolStartTransActive="float"Description: Moving tool start translation if object change inactive
Type: Float
Required: no
 translationInactive="x y z"Description: translation if object change is in active
Type: Translation values (x, y, z)
Required: no
 scaleActive="x y z"Description: scale if object change is active
Type: Scale values (x, y, z)
Required: no
 compoundChildActive="boolean"Description: compound child state if object change is active
Type: Boolean
Required: no
 rotationInactive="x y z"Description: rotation if object change is in active
Type: Rotation values (x, y, z)
Required: no
/>
<additionalAttachment filename="string"Description: Path to additional attachment
Type: String
Required: no
 inputAttacherJointIndex="integer"Description: Input attacher joint index of additional attachment
Type: Integer
Required: no
 needsLowering="boolean"Description: Additional implements needs lowering
Type: Boolean
Required: no
 jointType="string"Description: Additional implement joint type
Type: String
Required: no
/>
<heightNode foldMaxLimit="1"Description: Fold max. time
Type: Float
Default: 1
Required: no
 foldMinLimit="0"Description: Fold min. time
Type: Float
Default: 0
Required: no
 node="node"Description: Height Node
Type: Index to i3d node or i3d mapping identifier
Required: no
 disablingAttacherJointIndices="1 2 .. n"Description: Attacher joint indices that disable height node if something is attached
Type: Multiple values
Required: no
/>
<distanceToGround upper="float"Description: Upper distance to ground
Type: Float
Required: no
 lower="float"Description: Lower distance to ground
Type: Float
Required: no
>
<vehicle lower="float"Description: Lower distance to ground while attached to this vehicle
Type: Float
Required: no
 upper="float"Description: Upper distance to ground while attached to this vehicle
Type: Float
Required: no
 filename="string"Description: Vehicle filename to activate these distances
Type: String
Required: no
/>
</distanceToGround>
<bottomArm ballFilename="string"Description: Path to custom ball i3d file to use
Type: String
Required: no
 ballType="1"Description: Ball type to load (1: regular ball, 2: ball with guide cone)
Type: Integer
Default: 1
Required: no
 ballDefaultVisibility="boolean"Description: Defines if the balls are also visible while the tool is not attached
Type: Boolean
Default: 'true' if no toolbar is used ('needsToolbar' attribute)
Required: no
 widths="1 2 .. n"Description: Manual definition of the available lower link widths. Overwrites the category definition. Multiple width values separated by a whitespace.
Type: Multiple values
Required: no
 categories="1 2 .. n"Description: Bottom arm categories (0-4). Defines the width of the lower links and the ball size. Can be multiple categories separated by a whitespace if the tool support more than one.
Type: Multiple values
Required: no
/>
<subType showWarning="true"Description: Show warning if user tries to attach with a different sub type
Type: Boolean
Default: true
Required: no
 name="string"Description: If defined this type needs to match with the sub type in the attacher vehicle
Type: String
Required: no
/>
<additionalJoint node="node"Description: Additional joint node to connect
Type: Index to i3d node or i3d mapping identifier
Required: no
/>
<dependentAttacherJoint attacherJointIndex="integer"Description: Dependent attacher joint index
Type: Integer
Required: no
/>
<additionalObjects>
<additionalObject attacherVehiclePath="string"Description: Path to vehicle for object activation
Type: String
Required: no
 node="node"Description: Additional object node
Type: Index to i3d node or i3d mapping identifier
Required: no
/>
</additionalObjects>
</inputAttacherJoint>
</inputAttacherJoints>
<sounds>
<active volumeScale="1"Description: Additional scale that is applied on the volume attributes
Type: Float
Default: 1
Required: no
 fadeOut="0"Description: Fade out time in seconds
Type: Float
Default: 0
Required: no
 innerRadius="80"Description: Inner radius
Type: Float
Default: 80
Required: no
 template="string"Description: Sound template name
Type: String
Required: no
 debug="false"Description: Flag to enable debug rendering
Type: Boolean
Default: false
Required: no
 priority="MEDIUM"Description: Priority of the sound
Type: String
Default: MEDIUM
Required: no
 fadeIn="0"Description: Fade in time in seconds
Type: Float
Default: 0
Required: no
 linkNodeOffset="x y z"Description: Sound source will be offset by this value to the link node
Type: Translation values (x, y, z)
Required: no
 loops="1"Description: Number of loops (0 = infinite)
Type: Integer
Default: 1
Required: no
 supportsReverb="true"Description: Flag to disable reverb
Type: Boolean
Default: true
Required: no
 file="string"Description: Path to sound sample
Type: String
Required: no
 parent="string"Description: Parent sample for inheritance
Type: String
Required: no
 linkNode="node"Description: Link node for 3d sound
Type: Index to i3d node or i3d mapping identifier
Required: no
 isLocalSound="false"Description: While set for vehicle sounds it will only play for the player currently using the vehicle
Type: Boolean
Default: false
Required: no
 pitchScale="1"Description: Additional pitch that is applied on the volume attributes
Type: Float
Default: 1
Required: no
 lowpassGainScale="1"Description: Additional lowpass gain that is applied on the volume attributes
Type: Float
Default: 1
Required: no
 outerRadius="5"Description: Outer radius
Type: Float
Default: 5
Required: no
 loopSynthesisRPMRatio="1"Description: Ratio between rpm in the gls file and actual rpm of the motor (e.g. 0.9: max. rpm in the gls file will be reached at 90% of motor rpm)
Type: Float
Default: 1
Required: no
>
<lowpassCutoffFrequency indoor="5000"Description: Indoor lowpass cutoff frequency
Type: Float
Default: 5000
Required: no
 outdoor="5000"Description: Outdoor lowpass cutoff frequency
Type: Float
Default: 5000
Required: no
/>
<randomization maxVolume="float"Description: Max volume
Type: Float
Required: no
 maxLowpassGain="float"Description: Max lowpass gain
Type: Float
Required: no
 isInside="true"Description: Randomization is applied inside
Type: Boolean
Default: true
Required: no
 minVolume="float"Description: Min volume
Type: Float
Required: no
 minPitch="float"Description: Max pitch
Type: Float
Required: no
 maxPitch="float"Description: Max pitch
Type: Float
Required: no
 minLowpassGain="float"Description: Max lowpass gain
Type: Float
Required: no
 isOutside="true"Description: Randomization is applied outside
Type: Boolean
Default: true
Required: no
/>
<sourceRandomization file="string"Description: Path to sound sample
Type: String
Required: no
/>
<loopSynthesisLoad>
<modifier value="float"Description: Source value of modifier type
Type: Float
Required: no
 type="string"Description: Modifier type
Type: String
Required: no
 modifiedValue="float"Description: Change that is applied on sample value
Type: Float
Required: no
/>
</loopSynthesisLoad>
<lowpassGain indoor="0.8"Description: Indoor lowpass gain
Type: Float
Default: 0.8
Required: no
 outdoor="1"Description: Outdoor lowpass gain
Type: Float
Default: 1
Required: no
>
<modifier value="float"Description: Source value of modifier type
Type: Float
Required: no
 type="string"Description: Modifier type
Type: String
Required: no
 modifiedValue="float"Description: Change that is applied on sample value
Type: Float
Required: no
/>
</lowpassGain>
<loopSynthesisRpm>
<modifier type="string"Description: Modifier type
Type: String
Required: no
 modifiedValue="float"Description: Change that is applied on sample value
Type: Float
Required: no
 value="float"Description: Source value of modifier type
Type: Float
Required: no
/>
</loopSynthesisRpm>
<pitch indoor="1"Description: Indoor pitch
Type: Float
Default: 1
Required: no
 outdoor="1"Description: Outdoor pitch
Type: Float
Default: 1
Required: no
>
<modifier type="string"Description: Modifier type
Type: String
Required: no
 value="float"Description: Source value of modifier type
Type: Float
Required: no
 modifiedValue="float"Description: Change that is applied on sample value
Type: Float
Required: no
/>
</pitch>
<volume indoor="0.8"Description: Indoor volume
Type: Float
Default: 0.8
Required: no
 outdoor="1"Description: Outdoor volume
Type: Float
Default: 1
Required: no
>
<modifier type="string"Description: Modifier type
Type: String
Required: no
 value="float"Description: Source value of modifier type
Type: Float
Required: no
 modifiedValue="float"Description: Change that is applied on sample value
Type: Float
Required: no
/>
</volume>
<lowpassResonance indoor="2"Description: Indoor lowpass resonance
Type: Float
Default: 2
Required: no
 outdoor="2"Description: Outdoor lowpass resonance
Type: Float
Default: 2
Required: no
/>
</active>
</sounds>
<inputAttacherJointConfigurations postLoadObjectChange="false"Description: Defines if the object changes are applied before or after post load (can be helpful if you manipulate wheel nodes, which is only possible before postLoad)
Type: Boolean
Default: false
Required: no
 isYesNoOption="false"Description: UI in the shop will just show a yes/no slider element
Type: Boolean
Default: false
Required: no
 title="string"Description: configuration title to display in shop
Type: String or l10n key
Required: no
>
<inputAttacherJointConfiguration vehicleIcon="string"Description: Custom icon to display after bought with this configuration
Type: String
Required: no
 name="string"Description: Configuration name
Type: String or l10n key
Required: no
 desc="string"Description: Configuration description
Type: String or l10n key
Required: no
 price="0"Description: Price of configuration
Type: Float
Default: 0
Required: no
 params="string"Description: Extra parameters to insert in #name text
Type: String
Required: no
 isDefault="false"Description: Is selected by default in shop config screen
Type: Boolean
Default: false
Required: no
 isSelectable="true"Description: Configuration can be selected in the shop
Type: Boolean
Default: true
Required: no
 workingWidth="float"Description: Work width to display in shop while config is active
Type: Float
Required: no
 displayBrand="string"Description: If defined a brand icon is displayed in the shop config screen
Type: String
Required: no
 typeDesc="string"Description: Type description text to display in shop while config is active
Type: String or l10n key
Required: no
 vehicleBrand="string"Description: Custom brand to display after bought with this configuration
Type: String
Required: no
 vehicleName="string"Description: Custom vehicle name to display after bought with this configuration
Type: String or l10n key
Required: no
 saveId="Number of configuration"Description: Custom save id
Type: String
Default: Number of configuration
Required: no
 dailyUpkeep="0"Description: Daily up keep with this configuration
Type: Float
Default: 0
Required: no
 powerTakeOffConfigId="integer"Description: Power take off configuration index to use
Type: Integer
Required: no
 connectionHoseConfigId="integer"Description: Connection hose configuration index to use
Type: Integer
Required: no
>
<objectChange shaderParameterSetRecursive="false"Description: Shader parameter is applied to all child nodes recursively
Type: Boolean
Default: false
Required: no
 deleteInactive="boolean"Description: delete if object change is active
Type: Boolean
Required: no
 movingPartUpdateActive="boolean"Description: moving part active state if object change active
Type: Boolean
Required: no
 movingToolTransMinInactive="float"Description: Moving tool min. translation if object change inactive
Type: Float
Required: no
 movingToolRotMaxInactive="angle"Description: Moving tool max. rotation if object change inactive
Type: Angle
Required: no
 movingToolStartRotInactive="angle"Description: Moving tool start rotation if object change inactive
Type: Angle
Required: no
 movingToolRotMaxActive="angle"Description: Moving tool max. rotation if object change active
Type: Angle
Required: no
 scaleInactive="x y z"Description: scale if object change is in active
Type: Scale values (x, y, z)
Required: no
 movingToolRotMinInactive="angle"Description: Moving tool min. rotation if object change inactive
Type: Angle
Required: no
 rotationActive="x y z"Description: rotation if object change is active
Type: Rotation values (x, y, z)
Required: no
 parentNodeInactive="node"Description: parent node if object change is in active
Type: Index to i3d node or i3d mapping identifier
Required: no
 rigidBodyTypeActive="string"Description: rigid body type if object change is active
Type: String
Required: no
 scaleActive="x y z"Description: scale if object change is active
Type: Scale values (x, y, z)
Required: no
 node="node"Description: Object change node
Type: Index to i3d node or i3d mapping identifier
Required: no
 movingToolStartRotActive="angle"Description: Moving tool start rotation if object change inactive
Type: Angle
Required: no
 centerOfMassActive="x y z"Description: center of mass if object change is active
Type: Multiple values (x, y, z)
Required: no
 movingToolTransMinActive="float"Description: Moving tool min. translation if object change active
Type: Float
Required: no
 movingToolTransMaxActive="float"Description: Moving tool max. translation if object change active
Type: Float
Required: no
 massActive="float"Description: mass if object change is active
Type: Float
Required: no
 parentNodeActive="node"Description: parent node if object change is active
Type: Index to i3d node or i3d mapping identifier
Required: no
 compoundChildInactive="boolean"Description: compound child state if object change is in active
Type: Boolean
Required: no
 compoundChildActive="boolean"Description: compound child state if object change is active
Type: Boolean
Required: no
 centerOfMassInactive="x y z"Description: center of mass if object change is in active
Type: Multiple values (x, y, z)
Required: no
 massInactive="float"Description: mass if object change is in active
Type: Float
Required: no
 shaderParameterInactive="x y z w"Description: shaderParameter if object change is in active
Type: Multiple values (x, y, z, w)
Required: no
 shaderParameterActive="x y z w"Description: shaderParameter if object change is active
Type: Multiple values (x, y, z, w)
Required: no
 shaderParameter="string"Description: Shader parameter name
Type: String
Required: no
 translationInactive="x y z"Description: translation if object change is in active
Type: Translation values (x, y, z)
Required: no
 translationActive="x y z"Description: translation if object change is active
Type: Translation values (x, y, z)
Required: no
 visibilityInactive="boolean"Description: visibility if object change is in active
Type: Boolean
Required: no
 deleteActive="boolean"Description: delete if object change is active
Type: Boolean
Required: no
 interpolationTime="1"Description: Time for interpolation
Type: Time in seconds
Default: 1
Required: no
 interpolation="false"Description: Value will be interpolated
Type: Boolean
Default: false
Required: no
 movingPartUpdateInactive="boolean"Description: moving part active state if object change inactive
Type: Boolean
Required: no
 movingToolStartTransInactive="float"Description: Moving tool start translation if object change inactive
Type: Float
Required: no
 movingToolStartTransActive="float"Description: Moving tool start translation if object change inactive
Type: Float
Required: no
 movingToolRotMinActive="angle"Description: Moving tool min. rotation if object change active
Type: Angle
Required: no
 visibilityActive="boolean"Description: visibility if object change is active
Type: Boolean
Required: no
 movingToolTransMaxInactive="float"Description: Moving tool max. translation if object change inactive
Type: Float
Required: no
 rotationInactive="x y z"Description: rotation if object change is in active
Type: Rotation values (x, y, z)
Required: no
 rigidBodyTypeInactive="string"Description: rigid body type if object change is in active
Type: String
Required: no
 sharedShaderParameter="false"Description: Shader parameter is applied on all objects with the same material
Type: Boolean
Default: false
Required: no
/>
<inputAttacherJoint needsLowJoint="false"Description: Needs low trailer joint (only if no joint type is given)
Type: Boolean
Default: false
Required: no
 forceSelectionOnAttach="true"Description: Is selected on attach
Type: Boolean
Default: true
Required: no
 nodeVisual="node"Description: Visual joint node
Type: Index to i3d node or i3d mapping identifier
Required: no
 allowsJointTransLimitMovement="true"Description: Translation limit is changed during lifting/lowering
Type: Boolean
Default: true
Required: no
 upperRotLimitScale="0 0 0"Description: Upper rot limit scale
Type: Multiple values (x, y, z)
Default: 0 0 0
Required: no
 rotLimitForceLimit="-1 -1 -1"Description: Rotation limit force limit
Type: Multiple values (x, y, z)
Default: -1 -1 -1
Required: no
 isDefaultLowered="false"Description: Is default lowered
Type: Boolean
Default: false
Required: no
 transLimitSpring="0 0 0"Description: Translation limit spring
Type: Multiple values (x, y, z)
Default: 0 0 0
Required: no
 needsLowering="boolean"Description: Needs lowering
Type: Boolean
Required: no
 steeringBarRightNode="node"Description: Right steering bar node (Node of movingPart that should point towards the steeringBar right node of the tractor)
Type: Index to i3d node or i3d mapping identifier
Required: no
 rotLimitDamping="1 1 1"Description: Rotation limit damping
Type: Multiple values (x, y, z)
Default: 1 1 1
Required: no
 forceAllowDetachWhileLifted="false"Description: Attacher vehicle can be always detached no matter if we are lifted or not
Type: Boolean
Default: false
Required: no
 upperRotationOffset="angle"Description: Rotation offset if lifted
Type: Angle
Default: 8 degrees for implements
Required: no
 allowsDetaching="true"Description: Allows detaching
Type: Boolean
Default: true
Required: no
 attachAngleLimitAxis="1"Description: Direction axis which is used to calculate angle to enable attach
Type: Integer
Default: 1
Required: no
 useFoldingLoweredState="false"Description: Use folding lowered state
Type: Boolean
Default: false
Required: no
 bottomArmLeftNode="node"Description: Left bottom arm node (Node can be used as movingTool target from the tractor)
Type: Index to i3d node or i3d mapping identifier
Required: no
 needsToolbar="false"Description: Needs toolbar
Type: Boolean
Default: false
Required: no
 foldMinLimit="0"Description: Fold min. time
Type: Float
Default: 0
Required: no
 allowAI="true"Description: Toggling of AI is allowed while attached to this attacher joint
Type: Boolean
Default: true
Required: no
 topReferenceNode="node"Description: Top Reference Node
Type: Index to i3d node or i3d mapping identifier
Required: no
 allowsJointRotLimitMovement="true"Description: Rotation limit is changed during lifting/lowering
Type: Boolean
Default: true
Required: no
 needsTrailerJoint="false"Description: Needs trailer joint (only if no joint type is given)
Type: Boolean
Default: false
Required: no
 steeringBarLeftNode="node"Description: Left steering bar node (Node of movingPart that should point towards the steeringBar left node of the tractor)
Type: Index to i3d node or i3d mapping identifier
Required: no
 rootNode="node"Description: Root node
Type: Index to i3d node or i3d mapping identifier
Default: Parent component of attacher joint node
Required: no
 useFruitCutHeight="true"Description: The lower distance to ground is used from the cutHeight defined in the current fruit type
Type: Boolean
Default: true
Required: no
 smoothAttachTime="0.5"Description: Time until the attachment is fully attached (seconds)
Type: Time in seconds
Default: 0.5
Required: no
 transLimitForceLimit="-1 -1 -1"Description: Translation limit force limit
Type: Multiple values (x, y, z)
Default: -1 -1 -1
Required: no
 lowerRotationOffset="angle"Description: Rotation offset if lowered
Type: Angle
Required: no
 isControllable="false"Description: Is controllable
Type: Boolean
Default: false
Required: no
 allowsLowering="boolean"Description: Allows lowering
Type: Boolean
Required: no
 upperTransLimitScale="0 0 0"Description: Upper trans limit scale
Type: Multiple values (x, y, z)
Default: 0 0 0
Required: no
 transLimitDamping="1 1 1"Description: Translation limit damping
Type: Multiple values (x, y, z)
Default: 1 1 1
Required: no
 drawbarNode="node"Description: Drawbar node (Node of movingPart that should point towards the attacherJoint node of the tractor)
Type: Index to i3d node or i3d mapping identifier
Required: no
 rotLimitSpring="0 0 0"Description: Rotation limit spring
Type: Multiple values (x, y, z)
Default: 0 0 0
Required: no
 hardAttach="false"Description: Implement is hard attached
Type: Boolean
Default: false
Required: no
 node="node"Description: Joint Node
Type: Index to i3d node or i3d mapping identifier
Required: no
 attacherHeight="float"Description: Height of attacher
Type: Float
Default: 0.9 for trailer, 0.55 for trailer low
Required: no
 jointType="string"Description: Joint type
Type: String
Required: no
 transLimitThreshold="0"Description: Defines when the transition from upper to lower trans limit starts (0: directly, 0.9: after 90% of lowering)
Type: Float
Default: 0
Required: no
 bottomArmRightNode="node"Description: Right bottom arm node (Node can be used as movingTool target from the tractor)
Type: Index to i3d node or i3d mapping identifier
Required: no
 fixedRotation="false"Description: Fixed rotation (Rot limit is freezed)
Type: Boolean
Default: false
Required: no
 useTopLights="true"Description: Defines if the tool attached to this attacher activates to automatic switch to the top lights
Type: Boolean
Default: true
Required: no
 canBeTurnedOn="true"Description: Attacher joint can turn on implement
Type: Boolean
Default: true
Required: no
 rotLimitThreshold="0"Description: Defines when the transition from upper to lower rot limit starts (0: directly, 0.9: after 90% of lowering)
Type: Float
Default: 0
Required: no
 allowTurnOn="true"Description: Turn on is allowed while attached to this attacher joint
Type: Boolean
Default: true
Required: no
 allowFolding="true"Description: Folding is allowed while attached to this attacher joint
Type: Boolean
Default: true
Required: no
 lowerTransLimitScale="0 0 0"Description: Lower trans limit scale
Type: Multiple values (x, y, z)
Default: 0 0 0
Required: no
 allowDetachWhileParentLifted="true"Description: If set to false the parent vehicle needs to be lowered to be able to detach this implement
Type: Boolean
Default: true
Required: no
 foldMaxLimit="1"Description: Fold max. time
Type: Float
Default: 1
Required: no
 forcedAttachingDirection="0"Description: Tool can be only attached in this direction
Type: Integer
Default: 0
Required: no
 lowerRotLimitScale="0 0 0"Description: Lower rot limit scale
Type: Multiple values (x, y, z)
Default: 0 0 0
Required: no
>
<additionalJoint node="node"Description: Additional joint node to connect
Type: Index to i3d node or i3d mapping identifier
Required: no
/>
<objectChange shaderParameterActive="x y z w"Description: shaderParameter if object change is active
Type: Multiple values (x, y, z, w)
Required: no
 movingPartUpdateInactive="boolean"Description: moving part active state if object change inactive
Type: Boolean
Required: no
 movingToolRotMaxActive="angle"Description: Moving tool max. rotation if object change active
Type: Angle
Required: no
 massInactive="float"Description: mass if object change is in active
Type: Float
Required: no
 rigidBodyTypeInactive="string"Description: rigid body type if object change is in active
Type: String
Required: no
 shaderParameterSetRecursive="false"Description: Shader parameter is applied to all child nodes recursively
Type: Boolean
Default: false
Required: no
 shaderParameter="string"Description: Shader parameter name
Type: String
Required: no
 rotationActive="x y z"Description: rotation if object change is active
Type: Rotation values (x, y, z)
Required: no
 visibilityActive="boolean"Description: visibility if object change is active
Type: Boolean
Required: no
 movingToolTransMaxActive="float"Description: Moving tool max. translation if object change active
Type: Float
Required: no
 massActive="float"Description: mass if object change is active
Type: Float
Required: no
 shaderParameterInactive="x y z w"Description: shaderParameter if object change is in active
Type: Multiple values (x, y, z, w)
Required: no
 movingToolTransMaxInactive="float"Description: Moving tool max. translation if object change inactive
Type: Float
Required: no
 centerOfMassInactive="x y z"Description: center of mass if object change is in active
Type: Multiple values (x, y, z)
Required: no
 scaleActive="x y z"Description: scale if object change is active
Type: Scale values (x, y, z)
Required: no
 compoundChildInactive="boolean"Description: compound child state if object change is in active
Type: Boolean
Required: no
 movingToolRotMinInactive="angle"Description: Moving tool min. rotation if object change inactive
Type: Angle
Required: no
 movingToolStartRotInactive="angle"Description: Moving tool start rotation if object change inactive
Type: Angle
Required: no
 movingToolStartTransInactive="float"Description: Moving tool start translation if object change inactive
Type: Float
Required: no
 movingToolTransMinInactive="float"Description: Moving tool min. translation if object change inactive
Type: Float
Required: no
 movingToolTransMinActive="float"Description: Moving tool min. translation if object change active
Type: Float
Required: no
 movingToolRotMaxInactive="angle"Description: Moving tool max. rotation if object change inactive
Type: Angle
Required: no
 movingToolStartRotActive="angle"Description: Moving tool start rotation if object change inactive
Type: Angle
Required: no
 movingPartUpdateActive="boolean"Description: moving part active state if object change active
Type: Boolean
Required: no
 movingToolRotMinActive="angle"Description: Moving tool min. rotation if object change active
Type: Angle
Required: no
 interpolation="false"Description: Value will be interpolated
Type: Boolean
Default: false
Required: no
 centerOfMassActive="x y z"Description: center of mass if object change is active
Type: Multiple values (x, y, z)
Required: no
 scaleInactive="x y z"Description: scale if object change is in active
Type: Scale values (x, y, z)
Required: no
 compoundChildActive="boolean"Description: compound child state if object change is active
Type: Boolean
Required: no
 movingToolStartTransActive="float"Description: Moving tool start translation if object change inactive
Type: Float
Required: no
 interpolationTime="1"Description: Time for interpolation
Type: Time in seconds
Default: 1
Required: no
 translationActive="x y z"Description: translation if object change is active
Type: Translation values (x, y, z)
Required: no
 rigidBodyTypeActive="string"Description: rigid body type if object change is active
Type: String
Required: no
 rotationInactive="x y z"Description: rotation if object change is in active
Type: Rotation values (x, y, z)
Required: no
 deleteActive="boolean"Description: delete if object change is active
Type: Boolean
Required: no
 translationInactive="x y z"Description: translation if object change is in active
Type: Translation values (x, y, z)
Required: no
 sharedShaderParameter="false"Description: Shader parameter is applied on all objects with the same material
Type: Boolean
Default: false
Required: no
 parentNodeActive="node"Description: parent node if object change is active
Type: Index to i3d node or i3d mapping identifier
Required: no
 parentNodeInactive="node"Description: parent node if object change is in active
Type: Index to i3d node or i3d mapping identifier
Required: no
 visibilityInactive="boolean"Description: visibility if object change is in active
Type: Boolean
Required: no
 deleteInactive="boolean"Description: delete if object change is active
Type: Boolean
Required: no
 node="node"Description: Object change node
Type: Index to i3d node or i3d mapping identifier
Required: no
/>
<dependentAttacherJoint attacherJointIndex="integer"Description: Dependent attacher joint index
Type: Integer
Required: no
/>
<subType showWarning="true"Description: Show warning if user tries to attach with a different sub type
Type: Boolean
Default: true
Required: no
 name="string"Description: If defined this type needs to match with the sub type in the attacher vehicle
Type: String
Required: no
/>
<bottomArm ballType="1"Description: Ball type to load (1: regular ball, 2: ball with guide cone)
Type: Integer
Default: 1
Required: no
 ballDefaultVisibility="boolean"Description: Defines if the balls are also visible while the tool is not attached
Type: Boolean
Default: 'true' if no toolbar is used ('needsToolbar' attribute)
Required: no
 ballFilename="string"Description: Path to custom ball i3d file to use
Type: String
Required: no
 widths="1 2 .. n"Description: Manual definition of the available lower link widths. Overwrites the category definition. Multiple width values separated by a whitespace.
Type: Multiple values
Required: no
 categories="1 2 .. n"Description: Bottom arm categories (0-4). Defines the width of the lower links and the ball size. Can be multiple categories separated by a whitespace if the tool support more than one.
Type: Multiple values
Required: no
/>
<heightNode foldMaxLimit="1"Description: Fold max. time
Type: Float
Default: 1
Required: no
 node="node"Description: Height Node
Type: Index to i3d node or i3d mapping identifier
Required: no
 foldMinLimit="0"Description: Fold min. time
Type: Float
Default: 0
Required: no
 disablingAttacherJointIndices="1 2 .. n"Description: Attacher joint indices that disable height node if something is attached
Type: Multiple values
Required: no
/>
<additionalAttachment jointType="string"Description: Additional implement joint type
Type: String
Required: no
 needsLowering="boolean"Description: Additional implements needs lowering
Type: Boolean
Required: no
 filename="string"Description: Path to additional attachment
Type: String
Required: no
 inputAttacherJointIndex="integer"Description: Input attacher joint index of additional attachment
Type: Integer
Required: no
/>
<distanceToGround lower="float"Description: Lower distance to ground
Type: Float
Required: no
 upper="float"Description: Upper distance to ground
Type: Float
Required: no
>
<vehicle lower="float"Description: Lower distance to ground while attached to this vehicle
Type: Float
Required: no
 filename="string"Description: Vehicle filename to activate these distances
Type: String
Required: no
 upper="float"Description: Upper distance to ground while attached to this vehicle
Type: Float
Required: no
/>
</distanceToGround>
<additionalObjects>
<additionalObject node="node"Description: Additional object node
Type: Index to i3d node or i3d mapping identifier
Required: no
 attacherVehiclePath="string"Description: Path to vehicle for object activation
Type: String
Required: no
/>
</additionalObjects>
</inputAttacherJoint>
<material sourceMaterialSlotName="string"Description: Material with this slot name replaces the material defined with 'targetMaterialSlotName'
Type: String
Required: no
 materialTemplateName="string"Description: Name of template to apply (all attributes will be used from template)
Type: String
Required: no
 materialSlotName="string"Description: Material slot name in the i3d file
Type: String
Required: no
 targetMaterialSlotName="string"Description: Material with this slot name is replaced the material defined with 'sourceMaterialSlotName'
Type: String
Required: no
 useDesignColorIndex="integer"Description: Use color of the design color with the defined index (1-16)
Type: Integer
Required: no
 node="node"Description: If defined, the 'targetMaterialSlotName' is only replaced for this node
Type: Index to i3d node or i3d mapping identifier
Required: no
 useRimColor="false"Description: Use rim color
Type: Boolean
Default: false
Required: no
 useBaseColor="false"Description: Use base vehicle color
Type: Boolean
Default: false
Required: no
 ignoreWarning="false"Description: If set to 'true' there is no warning if the material is not found.
Type: Boolean
Default: false
Required: no
 materialTemplateUseColorOnly="false"Description: If 'true', only the color is used from the material template. The rest from the i3d file.
Type: Boolean
Default: false
Required: no
>
<smoothness value="float"Description: Smoothness value
Type: Float
Required: no
/>
<textures diffuse="string"Description: Path to diffuse texture
Type: Path to a certain file
Required: no
 specular="string"Description: Path to specular texture
Type: Path to a certain file
Required: no
 normal="string"Description: Path to normal texture
Type: Path to a certain file
Required: no
/>
<clearCoat intensity="float"Description: Intensity of clear coat
Type: Float
Required: no
 smoothness="float"Description: Smoothness of clear coat
Type: Float
Required: no
/>
<detail specular="string"Description: Path to detail specular texture
Type: Path to a certain file
Required: no
 normal="string"Description: Path to detail normal texture
Type: Path to a certain file
Required: no
 diffuse="string"Description: Path to detail diffuse texture
Type: Path to a certain file
Required: no
/>
<metalness value="float"Description: Metalness value
Type: Float
Required: no
/>
<colorScale value="string"Description: Material color if it should not be used from configuration (can also be a different material template, from which then ONLY the color is taken)
Type: String
Required: no
/>
</material>
<attacherJoint useTopLights="boolean"Description: Defines if the attacher joint enables the top lights if something is attached. Flag needs to be set on the implement as well.
Type: Boolean
Default: 'true' if the attacher joint is on the front
Required: no
 canTurnOnImplement="true"Description: Can turn on implement
Type: Boolean
Default: true
Required: no
 lockUpTransLimit="false"Description: Lock up translation limit
Type: Boolean
Default: false
Required: no
 enableCollision="false"Description: Collision between vehicle is enabled
Type: Boolean
Default: false
Required: no
 lockDownRotLimit="false"Description: Lock down rotation limit
Type: Boolean
Default: false
Required: no
 jointType="implement"Description: Joint type
Type: String
Default: implement
Required: no
 supportsHardAttach="boolean"Description: Supports hard attach
Type: Boolean
Required: no
 moveTime="0.5"Description: Move time
Type: Float
Default: 0.5
Required: no
 transLimitForceLimit="-1 -1 -1"Description: Translation limit force limit
Type: Multiple values (x, y, z)
Default: -1 -1 -1
Required: no
 rotLimitForceLimit="-1 -1 -1"Description: Rotation limit force limit
Type: Multiple values (x, y, z)
Default: -1 -1 -1
Required: no
 node="node"Description: Node
Type: Index to i3d node or i3d mapping identifier
Required: no
 nodeVisual="node"Description: Visual node
Type: Index to i3d node or i3d mapping identifier
Required: no
 fillUnitIndex="1"Description: Reference fill unit index
Type: Integer
Default: 1
Required: no
 direction="integer"Description: Direction of attacher joint (1 = front, -1 = back). Used for additional attachments on mobile and top light control in basegame.
Type: Integer
Required: no
 lowerTransLimit="x y z"Description: Lower translation limit
Type: Multiple values (x, y, z)
Default: (0.5 0.5 0.5) for implement type, otherwise (0 0 0)
Required: no
 allowFoldingWhileAttached="true"Description: Allow folding while attached
Type: Boolean
Default: true
Required: no
 transLimitDamping="1 1 1"Description: Translation limit damping
Type: Multiple values (x, y, z)
Default: 1 1 1
Required: no
 allowsLowering="true"Description: Allows lowering
Type: Boolean
Default: true
Required: no
 maxFillLevel="1"Description: Max. fill level to activate attacher joint (pct between 0 and 1)
Type: Float
Default: 1
Required: no
 fillUnitTopArmOnly="false"Description: Block attaching of implements with top arm only
Type: Boolean
Default: false
Required: no
 comboTime="float"Description: Combo time
Type: Float
Required: no
 rootNode="node"Description: Root node
Type: Index to i3d node or i3d mapping identifier
Default: Parent component of attacher joint node
Required: no
 delayedObjectChangesOnAttach="false"Description: Defines if object change is activated on attach or post attach
Type: Boolean
Default: false
Required: no
 delayedObjectChanges="true"Description: Defines if object change is deactivated after the bottomArm has moved (if available)
Type: Boolean
Default: true
Required: no
 disabledByAttacherJoints="1 2 .. n"Description: This attacher becomes unavailable after attaching something to these attacher joint indices
Type: Multiple values
Required: no
 transLimitSpring="0 0 0"Description: Translation limit spring
Type: Multiple values (x, y, z)
Default: 0 0 0
Required: no
 rotLimitDamping="1 1 1"Description: Rotation limit damping
Type: Multiple values (x, y, z)
Default: 1 1 1
Required: no
 rotLimitSpring="0 0 0"Description: Rotation limit spring
Type: Multiple values (x, y, z)
Default: 0 0 0
Required: no
 upperTransLimit="x y z"Description: Upper translation limit
Type: Multiple values (x, y, z)
Default: Lower trans limit
Required: no
 upperRotLimit="x y z"Description: Upper rotation limit
Type: Rotation values (x, y, z)
Default: Lower rot limit
Required: no
 lowerRotLimit="x y z"Description: Lower rotation limit
Type: Rotation values (x, y, z)
Default: (20 20 20) for implement type, otherwise (0 0 0)
Required: no
 lockUpRotLimit="false"Description: Lock up rotation limit
Type: Boolean
Default: false
Required: no
 dynamicLowerRotLimit="false"Description: Set the lower rot limit dynamically based on the lowered state (so the attacher can freely rotate between it's upper and lower rotation value. E.g. for combines)
Type: Boolean
Default: false
Required: no
 upperRotationOffset="0"Description: Lower rotation offset
Type: Angle
Default: 0
Required: no
 lowerRotationOffset="0"Description: Upper rotation offset
Type: Angle
Default: 0
Required: no
 isDefaultLowered="false"Description: Default lowered state
Type: Boolean
Default: false
Required: no
 allowsJointLimitMovement="true"Description: Allows joint limit movement
Type: Boolean
Default: true
Required: no
 minFillLevel="0"Description: Min. fill level to activate attacher joint (pct between 0 and 1)
Type: Float
Default: 0
Required: no
 lockDownTransLimit="true"Description: Lock down translation limit
Type: Boolean
Default: true
Required: no
 allowDetachingWhileLifted="true"Description: Allow detach while lifted
Type: Boolean
Default: true
Required: no
 jointPositionOffset="0 0 0"Description: Joint position offset
Type: Multiple values (x, y, z)
Default: 0 0 0
Required: no
>
<attachSound supportsReverb="true"Description: Flag to disable reverb
Type: Boolean
Default: true
Required: no
 fadeIn="0"Description: Fade in time in seconds
Type: Float
Default: 0
Required: no
 loopSynthesisRPMRatio="1"Description: Ratio between rpm in the gls file and actual rpm of the motor (e.g. 0.9: max. rpm in the gls file will be reached at 90% of motor rpm)
Type: Float
Default: 1
Required: no
 debug="false"Description: Flag to enable debug rendering
Type: Boolean
Default: false
Required: no
 priority="MEDIUM"Description: Priority of the sound
Type: String
Default: MEDIUM
Required: no
 fadeOut="0"Description: Fade out time in seconds
Type: Float
Default: 0
Required: no
 pitchScale="1"Description: Additional pitch that is applied on the volume attributes
Type: Float
Default: 1
Required: no
 innerRadius="80"Description: Inner radius
Type: Float
Default: 80
Required: no
 outerRadius="5"Description: Outer radius
Type: Float
Default: 5
Required: no
 loops="1"Description: Number of loops (0 = infinite)
Type: Integer
Default: 1
Required: no
 parent="string"Description: Parent sample for inheritance
Type: String
Required: no
 file="string"Description: Path to sound sample
Type: String
Required: no
 lowpassGainScale="1"Description: Additional lowpass gain that is applied on the volume attributes
Type: Float
Default: 1
Required: no
 volumeScale="1"Description: Additional scale that is applied on the volume attributes
Type: Float
Default: 1
Required: no
 template="string"Description: Sound template name
Type: String
Required: no
 linkNodeOffset="x y z"Description: Sound source will be offset by this value to the link node
Type: Translation values (x, y, z)
Required: no
 linkNode="node"Description: Link node for 3d sound
Type: Index to i3d node or i3d mapping identifier
Required: no
 isLocalSound="false"Description: While set for vehicle sounds it will only play for the player currently using the vehicle
Type: Boolean
Default: false
Required: no
>
<volume indoor="0.8"Description: Indoor volume
Type: Float
Default: 0.8
Required: no
 outdoor="1"Description: Outdoor volume
Type: Float
Default: 1
Required: no
>
<modifier type="string"Description: Modifier type
Type: String
Required: no
 modifiedValue="float"Description: Change that is applied on sample value
Type: Float
Required: no
 value="float"Description: Source value of modifier type
Type: Float
Required: no
/>
</volume>
<randomization isOutside="true"Description: Randomization is applied outside
Type: Boolean
Default: true
Required: no
 minLowpassGain="float"Description: Max lowpass gain
Type: Float
Required: no
 maxLowpassGain="float"Description: Max lowpass gain
Type: Float
Required: no
 isInside="true"Description: Randomization is applied inside
Type: Boolean
Default: true
Required: no
 maxPitch="float"Description: Max pitch
Type: Float
Required: no
 minPitch="float"Description: Max pitch
Type: Float
Required: no
 maxVolume="float"Description: Max volume
Type: Float
Required: no
 minVolume="float"Description: Min volume
Type: Float
Required: no
/>
<lowpassGain outdoor="1"Description: Outdoor lowpass gain
Type: Float
Default: 1
Required: no
 indoor="0.8"Description: Indoor lowpass gain
Type: Float
Default: 0.8
Required: no
>
<modifier type="string"Description: Modifier type
Type: String
Required: no
 modifiedValue="float"Description: Change that is applied on sample value
Type: Float
Required: no
 value="float"Description: Source value of modifier type
Type: Float
Required: no
/>
</lowpassGain>
<lowpassResonance indoor="2"Description: Indoor lowpass resonance
Type: Float
Default: 2
Required: no
 outdoor="2"Description: Outdoor lowpass resonance
Type: Float
Default: 2
Required: no
/>
<loopSynthesisLoad>
<modifier type="string"Description: Modifier type
Type: String
Required: no
 modifiedValue="float"Description: Change that is applied on sample value
Type: Float
Required: no
 value="float"Description: Source value of modifier type
Type: Float
Required: no
/>
</loopSynthesisLoad>
<pitch outdoor="1"Description: Outdoor pitch
Type: Float
Default: 1
Required: no
 indoor="1"Description: Indoor pitch
Type: Float
Default: 1
Required: no
>
<modifier type="string"Description: Modifier type
Type: String
Required: no
 value="float"Description: Source value of modifier type
Type: Float
Required: no
 modifiedValue="float"Description: Change that is applied on sample value
Type: Float
Required: no
/>
</pitch>
<lowpassCutoffFrequency outdoor="5000"Description: Outdoor lowpass cutoff frequency
Type: Float
Default: 5000
Required: no
 indoor="5000"Description: Indoor lowpass cutoff frequency
Type: Float
Default: 5000
Required: no
/>
<loopSynthesisRpm>
<modifier type="string"Description: Modifier type
Type: String
Required: no
 modifiedValue="float"Description: Change that is applied on sample value
Type: Float
Required: no
 value="float"Description: Source value of modifier type
Type: Float
Required: no
/>
</loopSynthesisRpm>
<sourceRandomization file="string"Description: Path to sound sample
Type: String
Required: no
/>
</attachSound>
<topArm materialTemplateName2="string"Description: Top arm material 2 (applied to 'upperLink_base_mat')
Type: Name of brand material template or color values (r,g,b)
Required: no
 useBrandDecal="true"Description: Defines if the brand decal on the top arm is allowed or not
Type: Boolean
Default: true
Required: no
 zScale="1"Description: Inverts top arm direction
Type: Integer
Default: 1
Required: no
 secondPartUseMainColor="true"Description: Defines if the material 'upperLink_head_mat' uses the 'material' or 'material2' value
Type: Boolean
Default: true
Required: no
 materialTemplateName="string"Description: Top arm material (applied to 'upperLink_main_mat')
Type: Name of brand material template or color values (r,g,b)
Required: no
 referenceNode="node"Description: Reference node if top arm not loaded from i3d
Type: Index to i3d node or i3d mapping identifier
Required: no
 translationNode="node"Description: Translation node if top arm not loaded from i3d
Type: Index to i3d node or i3d mapping identifier
Required: no
 rotationNode="node"Description: Rotation node if top arm not loaded from i3d
Type: Index to i3d node or i3d mapping identifier
Required: no
 decalMaterialTemplateName="string"Description: Top arm decal color (applied to 'upperLink_decal_mat')
Type: Name of brand material template or color values (r,g,b)
Required: no
 mountArmRotation="x y z"Description: Defines a custom mount arm rotation while no tool is attached
Type: Rotation values (x, y, z)
Required: no
 useMountArm="true"Description: Defines if the mount arm is visible or not
Type: Boolean
Default: true
Required: no
 toggleVisibility="false"Description: Top arm will be hidden on detach
Type: Boolean
Default: false
Required: no
 baseNode="node"Description: Link node for upper link
Type: Index to i3d node or i3d mapping identifier
Required: no
 filename="string"Description: Path to top arm i3d file
Type: Path to a certain file
Required: no
>
<objectChange rotationActive="x y z"Description: rotation if object change is active
Type: Rotation values (x, y, z)
Required: no
 sharedShaderParameter="false"Description: Shader parameter is applied on all objects with the same material
Type: Boolean
Default: false
Required: no
 movingToolTransMinActive="float"Description: Moving tool min. translation if object change active
Type: Float
Required: no
 shaderParameterActive="x y z w"Description: shaderParameter if object change is active
Type: Multiple values (x, y, z, w)
Required: no
 deleteInactive="boolean"Description: delete if object change is active
Type: Boolean
Required: no
 shaderParameterInactive="x y z w"Description: shaderParameter if object change is in active
Type: Multiple values (x, y, z, w)
Required: no
 shaderParameter="string"Description: Shader parameter name
Type: String
Required: no
 deleteActive="boolean"Description: delete if object change is active
Type: Boolean
Required: no
 scaleInactive="x y z"Description: scale if object change is in active
Type: Scale values (x, y, z)
Required: no
 scaleActive="x y z"Description: scale if object change is active
Type: Scale values (x, y, z)
Required: no
 rigidBodyTypeInactive="string"Description: rigid body type if object change is in active
Type: String
Required: no
 translationActive="x y z"Description: translation if object change is active
Type: Translation values (x, y, z)
Required: no
 centerOfMassActive="x y z"Description: center of mass if object change is active
Type: Multiple values (x, y, z)
Required: no
 movingToolStartRotInactive="angle"Description: Moving tool start rotation if object change inactive
Type: Angle
Required: no
 massActive="float"Description: mass if object change is active
Type: Float
Required: no
 movingToolRotMaxActive="angle"Description: Moving tool max. rotation if object change active
Type: Angle
Required: no
 parentNodeActive="node"Description: parent node if object change is active
Type: Index to i3d node or i3d mapping identifier
Required: no
 parentNodeInactive="node"Description: parent node if object change is in active
Type: Index to i3d node or i3d mapping identifier
Required: no
 rotationInactive="x y z"Description: rotation if object change is in active
Type: Rotation values (x, y, z)
Required: no
 movingToolRotMinInactive="angle"Description: Moving tool min. rotation if object change inactive
Type: Angle
Required: no
 rigidBodyTypeActive="string"Description: rigid body type if object change is active
Type: String
Required: no
 centerOfMassInactive="x y z"Description: center of mass if object change is in active
Type: Multiple values (x, y, z)
Required: no
 massInactive="float"Description: mass if object change is in active
Type: Float
Required: no
 translationInactive="x y z"Description: translation if object change is in active
Type: Translation values (x, y, z)
Required: no
 visibilityInactive="boolean"Description: visibility if object change is in active
Type: Boolean
Required: no
 visibilityActive="boolean"Description: visibility if object change is active
Type: Boolean
Required: no
 interpolationTime="1"Description: Time for interpolation
Type: Time in seconds
Default: 1
Required: no
 interpolation="false"Description: Value will be interpolated
Type: Boolean
Default: false
Required: no
 node="node"Description: Object change node
Type: Index to i3d node or i3d mapping identifier
Required: no
 movingPartUpdateInactive="boolean"Description: moving part active state if object change inactive
Type: Boolean
Required: no
 movingPartUpdateActive="boolean"Description: moving part active state if object change active
Type: Boolean
Required: no
 movingToolStartTransInactive="float"Description: Moving tool start translation if object change inactive
Type: Float
Required: no
 movingToolStartTransActive="float"Description: Moving tool start translation if object change inactive
Type: Float
Required: no
 movingToolTransMinInactive="float"Description: Moving tool min. translation if object change inactive
Type: Float
Required: no
 movingToolTransMaxInactive="float"Description: Moving tool max. translation if object change inactive
Type: Float
Required: no
 movingToolStartRotActive="angle"Description: Moving tool start rotation if object change inactive
Type: Angle
Required: no
 movingToolRotMinActive="angle"Description: Moving tool min. rotation if object change active
Type: Angle
Required: no
 movingToolTransMaxActive="float"Description: Moving tool max. translation if object change active
Type: Float
Required: no
 compoundChildInactive="boolean"Description: compound child state if object change is in active
Type: Boolean
Required: no
 movingToolRotMaxInactive="angle"Description: Moving tool max. rotation if object change inactive
Type: Angle
Required: no
 compoundChildActive="boolean"Description: compound child state if object change is active
Type: Boolean
Required: no
 shaderParameterSetRecursive="false"Description: Shader parameter is applied to all child nodes recursively
Type: Boolean
Default: false
Required: no
/>
</topArm>
<transNode maxY="float"Description: Max Y translation
Type: Float
Required: no
 height="0.12"Description: Height of visual translation node
Type: Float
Default: 0.12
Required: no
 node="node"Description: Translation node
Type: Index to i3d node or i3d mapping identifier
Required: no
 minY="float"Description: Min Y translation
Type: Float
Required: no
>
<dependentBottomArm threshold="float"Description: If the trans node Y translation is below this threshold the rotation will be set
Type: Float
Default: unlimited, so rotation is always set
Required: no
 rotation="0 0 0"Description: Rotation to be set when the translation node is below the threshold
Type: Rotation values (x, y, z)
Default: 0 0 0
Required: no
 node="node"Description: Dependent bottom arm node
Type: Index to i3d node or i3d mapping identifier
Required: no
/>
</transNode>
<bottomArm jointPositionNode="node"Description: Node that will be equalized with the current attacher joint position of the attached implement
Type: Index to i3d node or i3d mapping identifier
Required: no
 widthRange="1 2 .. n"Description: Defines the min. and max. bottom arm width that can be used separated by a whitespace. Overwrites the categoryRange attribute. (if only one value is given it will be used as min. and max. value.)
Type: Multiple values
Required: no
 startRotation="x y z"Description: Start rotation
Type: Rotation values (x, y, z)
Default: values set in i3d
Required: no
 rotationNode="node"Description: Rotation node of bottom arm
Type: Index to i3d node or i3d mapping identifier
Required: no
 resetSpeed="45"Description: Speed of bottom arm to return to idle position (deg/sec)
Type: Angle
Default: 45
Required: no
 leftNode="node"Description: Node of moving tool that will be aligned to 'bottomArmLeftNode', if defined in the tool
Type: Index to i3d node or i3d mapping identifier
Required: no
 ballVisibility="true"Description: Defines if the balls of the tool are visible while the tool is attached to us
Type: Boolean
Default: true
Required: no
 categoryRange="1 4"Description: Defines the min. and max. category that can be used separated by a whitespace. (if only one value is given it will be used as min. and max. value.)
Type: Multiple values
Default: 1 4
Required: no
 defaultCategory="integer"Description: Defines the default width category which is used when nothing is attached
Type: Integer
Default: Width inside i3d file
Required: no
 defaultWidth="float"Description: Defines the default bottom arm width while nothing is attached
Type: Float
Default: Width inside i3d file
Required: no
 toggleVisibility="false"Description: Bottom arm will be hidden on detach
Type: Boolean
Default: false
Required: no
 lockDirection="true"Description: Lock direction
Type: Boolean
Default: true
Required: no
 zScale="1"Description: Inverts bottom arm direction
Type: Integer
Default: 1
Required: no
 referenceNode="node"Description: Reference node of bottom arm
Type: Index to i3d node or i3d mapping identifier
Required: no
 translationNode="node"Description: Translation node of bottom arm
Type: Index to i3d node or i3d mapping identifier
Required: no
 rightNode="node"Description: Node of moving tool that will be aligned to 'bottomArmRightNode', if defined in the tool
Type: Index to i3d node or i3d mapping identifier
Required: no
 updateReferenceDistance="false"Description: If 'true', the reference distance will be updated dynamically. So it's possible to adjust the bottom arm length.
Type: Boolean
Default: false
Required: no
>
<armRight node="node"Description: Right bottom arm
Type: Index to i3d node or i3d mapping identifier
Required: no
 referenceNode="node"Description: Right bottom arm reference node (placed at the attaching point at the end of the bottom arm. If not defined the arm will be translated on the X axis to the target width.)
Type: Index to i3d node or i3d mapping identifier
Required: no
/>
<armLeft referenceNode="node"Description: Left bottom arm reference node (placed at the attaching point at the end of the bottom arm. If not defined the arm will be translated on the X axis to the target width.)
Type: Index to i3d node or i3d mapping identifier
Required: no
 node="node"Description: Left bottom arm
Type: Index to i3d node or i3d mapping identifier
Required: no
/>
</bottomArm>
<detachSound innerRadius="80"Description: Inner radius
Type: Float
Default: 80
Required: no
 fadeIn="0"Description: Fade in time in seconds
Type: Float
Default: 0
Required: no
 loops="1"Description: Number of loops (0 = infinite)
Type: Integer
Default: 1
Required: no
 supportsReverb="true"Description: Flag to disable reverb
Type: Boolean
Default: true
Required: no
 fadeOut="0"Description: Fade out time in seconds
Type: Float
Default: 0
Required: no
 linkNodeOffset="x y z"Description: Sound source will be offset by this value to the link node
Type: Translation values (x, y, z)
Required: no
 parent="string"Description: Parent sample for inheritance
Type: String
Required: no
 debug="false"Description: Flag to enable debug rendering
Type: Boolean
Default: false
Required: no
 outerRadius="5"Description: Outer radius
Type: Float
Default: 5
Required: no
 file="string"Description: Path to sound sample
Type: String
Required: no
 loopSynthesisRPMRatio="1"Description: Ratio between rpm in the gls file and actual rpm of the motor (e.g. 0.9: max. rpm in the gls file will be reached at 90% of motor rpm)
Type: Float
Default: 1
Required: no
 lowpassGainScale="1"Description: Additional lowpass gain that is applied on the volume attributes
Type: Float
Default: 1
Required: no
 pitchScale="1"Description: Additional pitch that is applied on the volume attributes
Type: Float
Default: 1
Required: no
 volumeScale="1"Description: Additional scale that is applied on the volume attributes
Type: Float
Default: 1
Required: no
 priority="MEDIUM"Description: Priority of the sound
Type: String
Default: MEDIUM
Required: no
 isLocalSound="false"Description: While set for vehicle sounds it will only play for the player currently using the vehicle
Type: Boolean
Default: false
Required: no
 template="string"Description: Sound template name
Type: String
Required: no
 linkNode="node"Description: Link node for 3d sound
Type: Index to i3d node or i3d mapping identifier
Required: no
>
<pitch indoor="1"Description: Indoor pitch
Type: Float
Default: 1
Required: no
 outdoor="1"Description: Outdoor pitch
Type: Float
Default: 1
Required: no
>
<modifier modifiedValue="float"Description: Change that is applied on sample value
Type: Float
Required: no
 type="string"Description: Modifier type
Type: String
Required: no
 value="float"Description: Source value of modifier type
Type: Float
Required: no
/>
</pitch>
<randomization isOutside="true"Description: Randomization is applied outside
Type: Boolean
Default: true
Required: no
 minPitch="float"Description: Max pitch
Type: Float
Required: no
 maxPitch="float"Description: Max pitch
Type: Float
Required: no
 maxLowpassGain="float"Description: Max lowpass gain
Type: Float
Required: no
 maxVolume="float"Description: Max volume
Type: Float
Required: no
 isInside="true"Description: Randomization is applied inside
Type: Boolean
Default: true
Required: no
 minLowpassGain="float"Description: Max lowpass gain
Type: Float
Required: no
 minVolume="float"Description: Min volume
Type: Float
Required: no
/>
<volume indoor="0.8"Description: Indoor volume
Type: Float
Default: 0.8
Required: no
 outdoor="1"Description: Outdoor volume
Type: Float
Default: 1
Required: no
>
<modifier value="float"Description: Source value of modifier type
Type: Float
Required: no
 modifiedValue="float"Description: Change that is applied on sample value
Type: Float
Required: no
 type="string"Description: Modifier type
Type: String
Required: no
/>
</volume>
<lowpassGain indoor="0.8"Description: Indoor lowpass gain
Type: Float
Default: 0.8
Required: no
 outdoor="1"Description: Outdoor lowpass gain
Type: Float
Default: 1
Required: no
>
<modifier value="float"Description: Source value of modifier type
Type: Float
Required: no
 modifiedValue="float"Description: Change that is applied on sample value
Type: Float
Required: no
 type="string"Description: Modifier type
Type: String
Required: no
/>
</lowpassGain>
<loopSynthesisRpm>
<modifier type="string"Description: Modifier type
Type: String
Required: no
 value="float"Description: Source value of modifier type
Type: Float
Required: no
 modifiedValue="float"Description: Change that is applied on sample value
Type: Float
Required: no
/>
</loopSynthesisRpm>
<loopSynthesisLoad>
<modifier type="string"Description: Modifier type
Type: String
Required: no
 modifiedValue="float"Description: Change that is applied on sample value
Type: Float
Required: no
 value="float"Description: Source value of modifier type
Type: Float
Required: no
/>
</loopSynthesisLoad>
<sourceRandomization file="string"Description: Path to sound sample
Type: String
Required: no
/>
<lowpassResonance outdoor="2"Description: Outdoor lowpass resonance
Type: Float
Default: 2
Required: no
 indoor="2"Description: Indoor lowpass resonance
Type: Float
Default: 2
Required: no
/>
<lowpassCutoffFrequency indoor="5000"Description: Indoor lowpass cutoff frequency
Type: Float
Default: 5000
Required: no
 outdoor="5000"Description: Outdoor lowpass cutoff frequency
Type: Float
Default: 5000
Required: no
/>
</detachSound>
<dependentComponentJoint attachInterpolationTime="1"Description: Time for the interpolation between the damping values after attach
Type: Time in seconds
Default: 1
Required: no
 transDampingFactor="float"Description: Factor that will be applied to the damping values on attach
Type: Float
Default: #transSpringFactor
Required: no
 transSpringFactor="1"Description: Factor that will be applied to the spring values on attach
Type: Float
Default: 1
Required: no
 detachInterpolationTime="0.5"Description: Time for the interpolation between the damping values after detach
Type: Time in seconds
Default: 0.5
Required: no
 index="integer"Description: Index of component joint that will be adjusted while something is attached
Type: Integer
Required: no
 referenceMass="1"Description: Reference mass for spring and damping adjustments. At the mass attached to the front, the full factor will be applied to the spring/damping. (to)
Type: Float
Default: 1
Required: no
/>
<objectChange compoundChildInactive="boolean"Description: compound child state if object change is in active
Type: Boolean
Required: no
 massActive="float"Description: mass if object change is active
Type: Float
Required: no
 compoundChildActive="boolean"Description: compound child state if object change is active
Type: Boolean
Required: no
 movingToolRotMaxInactive="angle"Description: Moving tool max. rotation if object change inactive
Type: Angle
Required: no
 movingPartUpdateInactive="boolean"Description: moving part active state if object change inactive
Type: Boolean
Required: no
 rigidBodyTypeActive="string"Description: rigid body type if object change is active
Type: String
Required: no
 movingToolStartTransInactive="float"Description: Moving tool start translation if object change inactive
Type: Float
Required: no
 movingToolTransMaxInactive="float"Description: Moving tool max. translation if object change inactive
Type: Float
Required: no
 rotationInactive="x y z"Description: rotation if object change is in active
Type: Rotation values (x, y, z)
Required: no
 deleteActive="boolean"Description: delete if object change is active
Type: Boolean
Required: no
 interpolation="false"Description: Value will be interpolated
Type: Boolean
Default: false
Required: no
 rotationActive="x y z"Description: rotation if object change is active
Type: Rotation values (x, y, z)
Required: no
 interpolationTime="1"Description: Time for interpolation
Type: Time in seconds
Default: 1
Required: no
 shaderParameterActive="x y z w"Description: shaderParameter if object change is active
Type: Multiple values (x, y, z, w)
Required: no
 scaleInactive="x y z"Description: scale if object change is in active
Type: Scale values (x, y, z)
Required: no
 rigidBodyTypeInactive="string"Description: rigid body type if object change is in active
Type: String
Required: no
 parentNodeActive="node"Description: parent node if object change is active
Type: Index to i3d node or i3d mapping identifier
Required: no
 centerOfMassInactive="x y z"Description: center of mass if object change is in active
Type: Multiple values (x, y, z)
Required: no
 centerOfMassActive="x y z"Description: center of mass if object change is active
Type: Multiple values (x, y, z)
Required: no
 shaderParameterInactive="x y z w"Description: shaderParameter if object change is in active
Type: Multiple values (x, y, z, w)
Required: no
 scaleActive="x y z"Description: scale if object change is active
Type: Scale values (x, y, z)
Required: no
 translationInactive="x y z"Description: translation if object change is in active
Type: Translation values (x, y, z)
Required: no
 visibilityInactive="boolean"Description: visibility if object change is in active
Type: Boolean
Required: no
 visibilityActive="boolean"Description: visibility if object change is active
Type: Boolean
Required: no
 deleteInactive="boolean"Description: delete if object change is active
Type: Boolean
Required: no
 node="node"Description: Object change node
Type: Index to i3d node or i3d mapping identifier
Required: no
 movingToolStartTransActive="float"Description: Moving tool start translation if object change inactive
Type: Float
Required: no
 movingToolTransMinInactive="float"Description: Moving tool min. translation if object change inactive
Type: Float
Required: no
 movingToolTransMinActive="float"Description: Moving tool min. translation if object change active
Type: Float
Required: no
 movingToolTransMaxActive="float"Description: Moving tool max. translation if object change active
Type: Float
Required: no
 movingToolStartRotActive="angle"Description: Moving tool start rotation if object change inactive
Type: Angle
Required: no
 movingToolRotMinInactive="angle"Description: Moving tool min. rotation if object change inactive
Type: Angle
Required: no
 movingToolRotMinActive="angle"Description: Moving tool min. rotation if object change active
Type: Angle
Required: no
 movingToolRotMaxActive="angle"Description: Moving tool max. rotation if object change active
Type: Angle
Required: no
 parentNodeInactive="node"Description: parent node if object change is in active
Type: Index to i3d node or i3d mapping identifier
Required: no
 shaderParameterSetRecursive="false"Description: Shader parameter is applied to all child nodes recursively
Type: Boolean
Default: false
Required: no
 translationActive="x y z"Description: translation if object change is active
Type: Translation values (x, y, z)
Required: no
 shaderParameter="string"Description: Shader parameter name
Type: String
Required: no
 movingToolStartRotInactive="angle"Description: Moving tool start rotation if object change inactive
Type: Angle
Required: no
 massInactive="float"Description: mass if object change is in active
Type: Float
Required: no
 movingPartUpdateActive="boolean"Description: moving part active state if object change active
Type: Boolean
Required: no
 sharedShaderParameter="false"Description: Shader parameter is applied on all objects with the same material
Type: Boolean
Default: false
Required: no
/>
<rotationNode startRotation="x y z"Description: Start rotation
Type: Rotation values (x, y, z)
Default: rotation in i3d
Required: no
 node="node"Description: Rotation node
Type: Index to i3d node or i3d mapping identifier
Required: no
 upperRotation="x y z"Description: Upper rotation
Type: Rotation values (x, y, z)
Default: rotation in i3d
Required: no
 lowerRotation="0 0 0"Description: Lower rotation
Type: Rotation values (x, y, z)
Default: 0 0 0
Required: no
/>
<schema liftedOffset="0 5"Description: Offset if lifted
Type: Multiple values (x, y)
Default: 0 5
Required: no
 invertX="false"Description: Invert X
Type: Boolean
Default: false
Required: no
 rotation="0"Description: Schema rotation
Type: Angle
Default: 0
Required: no
 position="x y"Description: Schema position
Type: Multiple values (x, y)
Required: no
/>
<visualAlignNode node="node"Description: Node of movingPart that should point towards the inputAttacherJoint node of the implement
Type: Index to i3d node or i3d mapping identifier
Required: no
 delayedOnAttach="true"Description: Node is updated after the smooth attach is finished
Type: Boolean
Default: true
Required: no
/>
<subType brandRestriction="string"Description: If defined it's only possible to attach tools from these brands (can be multiple separated by ' ')
Type: String
Required: no
 subTypeShowWarning="true"Description: Show warning if sub type does not match
Type: Boolean
Default: true
Required: no
 name="string"Description: If defined this type needs to match with the sub type in the tool
Type: String
Required: no
 vehicleRestriction="string"Description: If defined it's only possible to attach tools containing these strings in there xml path (can be multiple separated by ' ')
Type: String
Required: no
/>
<rotationNode2 upperRotation="x y z"Description: Upper rotation
Type: Rotation values (x, y, z)
Default: rotation in i3d
Required: no
 lowerRotation="0 0 0"Description: Lower rotation
Type: Rotation values (x, y, z)
Default: 0 0 0
Required: no
 node="node"Description: Rotation node
Type: Index to i3d node or i3d mapping identifier
Required: no
/>
<additionalToolConnection node="node"Description: Node to connect to
Type: Index to i3d node or i3d mapping identifier
Required: no
 id="string"Description: Identifier of the tool connection
Type: String
Required: no
/>
<steeringBars leftNode="node"Description: Steering bar left node
Type: Index to i3d node or i3d mapping identifier
Required: no
 forceUsage="true"Description: Forces usage of tools steering axle even if no steering bars are defined
Type: Boolean
Default: true
Required: no
 rightNode="node"Description: Steering bar right node
Type: Index to i3d node or i3d mapping identifier
Required: no
/>
<visuals hide="node"Description: Visual nodes that will be hidden while attacher joint is active if there attacher is inactive
Type: List of indices to i3d nodes or i3d mapping identifiers
Required: no
 nodes="node"Description: Visual nodes of attacher joint that will be visible when the joint is active
Type: List of indices to i3d nodes or i3d mapping identifiers
Required: no
/>
<toolbar filename="$data/shared/assets/toolbars/toolbars.i3d"Description: Filename to toolbars i3d containing 5 meshes for category 0-4
Type: String
Default: $data/shared/assets/toolbars/toolbars.i3d
Required: no
/>
<distanceToGround upper="1"Description: Upper distance to ground
Type: Float
Default: 1
Required: no
 lower="0.7"Description: Lower distance to ground
Type: Float
Default: 0.7
Required: no
/>
<additionalJoint node="node"Description: Additional joint node to connect
Type: Index to i3d node or i3d mapping identifier
Required: no
/>
</attacherJoint>
<aiAgent frontWheelNodes="node"Description: List of wheels (nodes) that are used for steering
Type: List of indices to i3d nodes or i3d mapping identifiers
Required: no
 maxTurningRadius="float"Description: Max. turning radius (overwrites value detected from ackermann steering)
Type: Float
Required: no
 height="float"Description: AI vehicle height
Type: Float
Required: no
 maxBrakeAcceleration="float"Description: AI vehicle max brake acceleration
Type: Float
Required: no
 frontOffset="float"Description: AI vehicle front offset
Type: Float
Required: no
 lengthOffset="float"Description: AI vehicle length offset
Type: Float
Required: no
 length="float"Description: AI vehicle length
Type: Float
Required: no
 width="float"Description: AI vehicle width
Type: Float
Required: no
 maxCentripetalAcceleration="float"Description: AI vehicle max centripetal acceleration
Type: Float
Required: no
 frontWheelIndices="1 2 .. n"Description: List of wheels (indices) that are used for steering
Type: Multiple values
Required: no
/>
<size minHeight="float"Description: Minimum height of the vehicle when loaded in this configuration
Type: Float
Required: no
 lengthOffset="float"Description: length offset
Type: Float
Required: no
 minLength="float"Description: Minimum length of the vehicle when loaded in this configuration
Type: Float
Required: no
 height="float"Description: occupied height of the vehicle when loaded in this configuration
Type: Float
Required: no
 heightOffset="float"Description: height offset
Type: Float
Required: no
 widthOffset="float"Description: width offset
Type: Float
Required: no
 minWidth="float"Description: Minimum width of the vehicle when loaded in this configuration
Type: Float
Required: no
 length="float"Description: occupied length of the vehicle when loaded in this configuration
Type: Float
Required: no
 width="float"Description: occupied width of the vehicle when loaded in this configuration
Type: Float
Required: no
/>
<xmlOverwrites>
<set path="string"Description: Path change in parent xml
Type: String
Required: no
 value="string"Description: Target value to set in parent file
Type: String
Required: no
/>
<remove path="string"Description: Path to remove from parent xml
Type: String
Required: no
/>
<clearList keepIndex="integer"Description: Index of list to keep
Type: Integer
Required: no
 path="string"Description: List to clear but keep one item
Type: String
Required: no
/>
</xmlOverwrites>
<shopOffset translation="x y z"Description: Shop translation offset when this config is used
Type: Translation values (x, y, z)
Required: no
 rotation="x y z"Description: Shop rotation offset when this config is used
Type: Rotation values (x, y, z)
Required: no
/>
<support delayedOnLoad="false"Description: Defines if the animation is played onPostLoad or onPreInitComponentPlacement -> useful if the animation collides e.g. with the folding animation
Type: Boolean
Default: false
Required: no
 delayedOnAttach="true"Description: Defines if the animation is played before or after the attaching process
Type: Boolean
Default: true
Required: no
 animationName="string"Description: Animation name
Type: String
Required: no
 detachAfterAnimation="true"Description: Defines if the vehicle is detached after the animation has played
Type: Boolean
Default: true
Required: no
 detachAnimationTime="1"Description: Defines when in the support animation the vehicle is detached (detachAfterAnimation needs to be true)
Type: Float
Default: 1
Required: no
>
<folding minLimit="0"Description: Min. fold limit
Type: Float
Default: 0
Required: no
 maxLimit="1"Description: Max. fold limit
Type: Float
Default: 1
Required: no
/>
</support>
<foliageBendingModifier minZ="float"Description: Min. length
Type: Float
Required: no
 minX="float"Description: Min. width
Type: Float
Required: no
 maxX="float"Description: Max. width
Type: Float
Required: no
 index="integer"Description: Bending node index
Type: Integer
Required: no
 overwrite="true"Description: Overwrite the bending node values and do not use the max values
Type: Boolean
Default: true
Required: no
 isActive="true"Description: Bending node is active
Type: Boolean
Default: true
Required: no
 yOffset="float"Description: Y translation offset
Type: Float
Required: no
 maxZ="float"Description: Max. length
Type: Float
Required: no
 indices="1 2 .. n"Description: Bending node indices
Type: Multiple values
Required: no
/>
<component node="node"Description: Component node
Type: Index to i3d node or i3d mapping identifier
Required: no
 additionalMassNode="node"Description: At this position, the additional mass will be applied to the component
Type: Index to i3d node or i3d mapping identifier
Required: no
 additionalMass="float"Description: Additional mass that is added to the component
Type: Float
Required: no
 useTotalMassReference="true"Description: Use total mass of vehicle as reference for center of mass adjustment. Otherwise just the mass of the component itself
Type: Boolean
Default: true
Required: no
 additionalMassOffset="x y z"Description: Offset to the component node to apply the mass there
Type: Translation values (x, y, z)
Required: no
>
<dependentComponentJoint index="integer"Description: Index of the component joint to influence
Type: Integer
Required: no
 transDampingFactor="float"Description: Factor that is applied to the trans damping of the component joint
Type: Float
Required: no
 transSpringFactor="float"Description: Factor that is applied to the trans spring of the component joint
Type: Float
Required: no
/>
</component>
<reverseDriving isAllowed="true"Description: Reverse driving is allowed while this configuration is equipped
Type: Boolean
Default: true
Required: no
/>
<weedSpotSpraySensors>
<sensorNode id="string"Description: Sensor identifier of the type to use
Type: String
Required: no
 translation="0 0 0"Description: Translation offset from node
Type: Translation values (x, y, z)
Default: 0 0 0
Required: no
 bracketSize="1"Description: Size of the bracket
Type: Float
Default: 1
Required: no
 rotation="0 0 0"Description: Rotation offset from node
Type: Rotation values (x, y, z)
Default: 0 0 0
Required: no
 node="string"Description: Name of node in i3d mapping
Type: String
Required: no
/>
</weedSpotSpraySensors>
<sprayerNozzles>
<nozzle translation="x y z"Description: Translation offset from the defined node
Type: Translation values (x, y, z)
Required: no
 node="node"Description: Nozzle Node
Type: Index to i3d node or i3d mapping identifier
Required: no
 rotation="x y z"Description: Rotation offset from the defined node
Type: Rotation values (x, y, z)
Required: no
/>
</sprayerNozzles>
<dependentConfiguration index="integer"Description: Index of the configuration to use
Type: Integer
Required: no
 name="string"Description: Name of the other configuration to set
Type: String
Required: no
/>
</inputAttacherJointConfiguration>
</inputAttacherJointConfigurations>
<steeringAxleAngleScale forceUsage="false"Description: Force usage of steering axle, even if attacher vehicle does not have steering bar nodes
Type: Boolean
Default: false
Required: no
 startSpeed="10"Description: Start speed
Type: Float
Default: 10
Required: no
 distanceDelay="0"Description: The steering angle is updated delayed after vehicle has been moved this distance
Type: Float
Default: 0
Required: no
 maxRot="0"Description: Max Rotation
Type: Angle
Default: 0
Required: no
 speedDependent="true"Description: Steering axle angle is scaled based on speed with #startSpeed and #endSpeed
Type: Boolean
Default: true
Required: no
 direction="1"Description: Direction
Type: Float
Default: 1
Required: no
 minRot="0"Description: Min Rotation
Type: Angle
Default: 0
Required: no
 referenceComponentIndex="integer"Description: If defined the given component is used for steering angle reference. Y between root component and this component will result in steering angle.
Type: Integer
Required: no
 backwards="false"Description: Is active backwards
Type: Boolean
Default: false
Required: no
 endSpeed="30"Description: End speed
Type: Float
Default: 30
Required: no
 speed="60"Description: Speed (Degrees per second)
Type: Angle
Default: 60
Required: no
 useSuperAttachable="false"Description: Use super attachable
Type: Boolean
Default: false
Required: no
>
<folding maxLimit="1"Description: Max. fold limit
Type: Float
Default: 1
Required: no
 minLimit="0"Description: Min. fold limit
Type: Float
Default: 0
Required: no
/>
<targetNode refAngle="angle"Description: Reference angle to transfer from angle between vehicles to defined min. and max. rot for target node
Type: Angle
Required: no
 node="node"Description: Target node
Type: Index to i3d node or i3d mapping identifier
Required: no
/>
</steeringAxleAngleScale>
<toolCameras>
<toolCamera rotation="x y z"Description: Camera rotation
Type: Rotation values (x, y, z)
Required: no
 limit="false"Description: Has limits
Type: Boolean
Default: false
Required: no
 useWorldXZRotation="boolean"Description: Use world XZ rotation
Type: Boolean
Required: no
 lookAtSmoothingParameter="float"Description: Look at smoothing parameter
Type: Float
Default: 0.176 for indoor / 0.022 for outside
Required: no
 transMin="float"Description: Min. Z translation
Type: Float
Required: no
 node="node"Description: Camera node
Type: Index to i3d node or i3d mapping identifier
Required: no
 useMirror="false"Description: Use mirrors
Type: Boolean
Default: false
Required: no
 rotMaxX="float"Description: Max. X rotation
Type: Float
Required: no
 resetCameraOnVehicleSwitch="boolean"Description: Reset camera on vehicle switch
Type: Boolean
Required: no
 rotatable="false"Description: Camera is rotatable
Type: Boolean
Default: false
Required: no
 rotateNode="node"Description: Rotate node
Type: Index to i3d node or i3d mapping identifier
Required: no
 useOutdoorSounds="boolean"Description: Use outdoor sounds
Type: Boolean
Default: false for 'isInside' cameras, otherwise true
Required: no
 useDefaultPositionSmoothing="true"Description: Use default position smoothing parameters
Type: Boolean
Default: true
Required: no
 rotYSteeringRotSpeed="0"Description: Rot Y steering rotation speed
Type: Angle
Default: 0
Required: no
 rotMinX="float"Description: Min. X rotation
Type: Float
Required: no
 translation="x y z"Description: Camera translation
Type: Translation values (x, y, z)
Required: no
 isInside="false"Description: Is camera inside. Used for camera smoothing and fallback/default value for 'useOutdoorSounds'
Type: Boolean
Default: false
Required: no
 suspensionNodeIndex="integer"Description: Index of seat suspension node
Type: Integer
Required: no
 shadowFocusBox="node"Description: Shadow focus box
Type: Index to i3d node or i3d mapping identifier
Required: no
 transMax="float"Description: Max. Z translation
Type: Float
Required: no
 positionSmoothingParameter="float"Description: Position smoothing parameter
Type: Float
Default: 0.128 for indoor / 0.016 for outside
Required: no
 allowHeadTracking="boolean"Description: Allow head tracking
Type: Boolean
Default: isInside value
Required: no
>
<objectChange movingToolStartTransActive="float"Description: Moving tool start translation if object change inactive
Type: Float
Required: no
 deleteActive="boolean"Description: delete if object change is active
Type: Boolean
Required: no
 centerOfMassActive="x y z"Description: center of mass if object change is active
Type: Multiple values (x, y, z)
Required: no
 movingToolTransMaxActive="float"Description: Moving tool max. translation if object change active
Type: Float
Required: no
 visibilityInactive="boolean"Description: visibility if object change is in active
Type: Boolean
Required: no
 interpolationTime="1"Description: Time for interpolation
Type: Time in seconds
Default: 1
Required: no
 shaderParameterSetRecursive="false"Description: Shader parameter is applied to all child nodes recursively
Type: Boolean
Default: false
Required: no
 translationInactive="x y z"Description: translation if object change is in active
Type: Translation values (x, y, z)
Required: no
 visibilityActive="boolean"Description: visibility if object change is active
Type: Boolean
Required: no
 shaderParameter="string"Description: Shader parameter name
Type: String
Required: no
 centerOfMassInactive="x y z"Description: center of mass if object change is in active
Type: Multiple values (x, y, z)
Required: no
 sharedShaderParameter="false"Description: Shader parameter is applied on all objects with the same material
Type: Boolean
Default: false
Required: no
 interpolation="false"Description: Value will be interpolated
Type: Boolean
Default: false
Required: no
 movingPartUpdateInactive="boolean"Description: moving part active state if object change inactive
Type: Boolean
Required: no
 shaderParameterActive="x y z w"Description: shaderParameter if object change is active
Type: Multiple values (x, y, z, w)
Required: no
 massInactive="float"Description: mass if object change is in active
Type: Float
Required: no
 movingToolTransMinInactive="float"Description: Moving tool min. translation if object change inactive
Type: Float
Required: no
 translationActive="x y z"Description: translation if object change is active
Type: Translation values (x, y, z)
Required: no
 shaderParameterInactive="x y z w"Description: shaderParameter if object change is in active
Type: Multiple values (x, y, z, w)
Required: no
 scaleActive="x y z"Description: scale if object change is active
Type: Scale values (x, y, z)
Required: no
 parentNodeInactive="node"Description: parent node if object change is in active
Type: Index to i3d node or i3d mapping identifier
Required: no
 scaleInactive="x y z"Description: scale if object change is in active
Type: Scale values (x, y, z)
Required: no
 compoundChildInactive="boolean"Description: compound child state if object change is in active
Type: Boolean
Required: no
 movingPartUpdateActive="boolean"Description: moving part active state if object change active
Type: Boolean
Required: no
 movingToolStartTransInactive="float"Description: Moving tool start translation if object change inactive
Type: Float
Required: no
 movingToolStartRotInactive="angle"Description: Moving tool start rotation if object change inactive
Type: Angle
Required: no
 movingToolRotMaxInactive="angle"Description: Moving tool max. rotation if object change inactive
Type: Angle
Required: no
 rotationActive="x y z"Description: rotation if object change is active
Type: Rotation values (x, y, z)
Required: no
 massActive="float"Description: mass if object change is active
Type: Float
Required: no
 deleteInactive="boolean"Description: delete if object change is active
Type: Boolean
Required: no
 movingToolStartRotActive="angle"Description: Moving tool start rotation if object change inactive
Type: Angle
Required: no
 movingToolRotMinActive="angle"Description: Moving tool min. rotation if object change active
Type: Angle
Required: no
 movingToolTransMaxInactive="float"Description: Moving tool max. translation if object change inactive
Type: Float
Required: no
 movingToolRotMinInactive="angle"Description: Moving tool min. rotation if object change inactive
Type: Angle
Required: no
 node="node"Description: Object change node
Type: Index to i3d node or i3d mapping identifier
Required: no
 rigidBodyTypeInactive="string"Description: rigid body type if object change is in active
Type: String
Required: no
 parentNodeActive="node"Description: parent node if object change is active
Type: Index to i3d node or i3d mapping identifier
Required: no
 rotationInactive="x y z"Description: rotation if object change is in active
Type: Rotation values (x, y, z)
Required: no
 compoundChildActive="boolean"Description: compound child state if object change is active
Type: Boolean
Required: no
 rigidBodyTypeActive="string"Description: rigid body type if object change is active
Type: String
Required: no
 movingToolTransMinActive="float"Description: Moving tool min. translation if object change active
Type: Float
Required: no
 movingToolRotMaxActive="angle"Description: Moving tool max. rotation if object change active
Type: Angle
Required: no
/>
<raycastNode node="node"Description: Raycast node
Type: Index to i3d node or i3d mapping identifier
Required: no
/>
</toolCamera>
</toolCameras>
<steeringAngleNodes>
<steeringAngleNode scale="1"Description: Scale of vehicle to vehicle angle that is applied
Type: Float
Default: 1
Required: no
 minSpeed="0"Description: Min. speed of vehicle to update
Type: Float
Default: 0
Required: no
 foldMinLimit="0"Description: Fold min. time for steering angle nodes to update
Type: Float
Default: 0
Required: no
 foldMaxLimit="1"Description: Fold max. time for steering angle nodes to update
Type: Float
Default: 1
Required: no
 offset="0"Description: Angle offset
Type: Angle
Default: 0
Required: no
 node="node"Description: Steering angle node
Type: Index to i3d node or i3d mapping identifier
Required: no
 speed="25"Description: Change speed (degree per second)
Type: Angle
Default: 25
Required: no
/>
</steeringAngleNodes>
<brakeForce includeAttachables="false"Description: Defines if the mass of the attached vehicles is included in the calculations
Type: Boolean
Default: false
Required: no
 maxForce="0"Description: Brake force when vehicle reached mass of #maxForceMass
Type: Float
Default: 0
Required: no
 maxForceMass="0"Description: When this mass is reached the vehicle will brake with #maxForce
Type: Float
Default: 0
Required: no
 loweredForce="float"Description: Brake force while the tool is lowered
Type: Float
Required: no
 force="0"Description: Brake force
Type: Float
Default: 0
Required: no
/>
<support delayedOnLoad="false"Description: Defines if the animation is played onPostLoad or onPreInitComponentPlacement -> useful if the animation collides e.g. with the folding animation
Type: Boolean
Default: false
Required: no
 detachAfterAnimation="true"Description: Defines if the vehicle is detached after the animation has played
Type: Boolean
Default: true
Required: no
 detachAnimationTime="1"Description: Defines when in the support animation the vehicle is detached (detachAfterAnimation needs to be true)
Type: Float
Default: 1
Required: no
 delayedOnAttach="true"Description: Defines if the animation is played before or after the attaching process
Type: Boolean
Default: true
Required: no
 animationName="string"Description: Animation name
Type: String
Required: no
>
<folding maxLimit="1"Description: Max. fold limit
Type: Float
Default: 1
Required: no
 minLimit="0"Description: Min. fold limit
Type: Float
Default: 0
Required: no
/>
</support>
<lowerAnimation directionOnDetach="0"Description: Direction on detach
Type: Integer
Default: 0
Required: no
 defaultLowered="false"Description: Is default lowered
Type: Boolean
Default: false
Required: no
 name="string"Description: Animation name
Type: String
Required: no
 speed="1"Description: Animation speed
Type: Float
Default: 1
Required: no
/>
<airConsumer usage="0"Description: Air consumption while fully braking
Type: Float
Default: 0
Required: no
/>
<power attachToPowerWarning="warning_attachToPower"Description: Warning to be displayed if no vehicle with motor is attached
Type: String or l10n key
Default: warning_attachToPower
Required: no
 requiresExternalPower="true"Description: Tool requires external power from a vehicle with motor to work
Type: Boolean
Default: true
Required: no
/>
</attachable>